Salt Palace Convention Center, Salt Lake City, UT
Wednesday, October 26, 2016, Room 355A
Jim Craig, President of Stratonics, will present two briefings at the MS&T 2016 Conference; “Thermal Control to Achieve Consistent and Uniform Mechanical Properties” and “The Effect of Global Heat Control on Melt Pool Temperature and Size“. Additional research will be presented by organizations implementing Stratonics ThermaViz® Sensor Technology. Final Program
Continue reading →
Michael Molitch-Hou from Engineering.com recently spoke with Stratonics President, Jim Craig, about the status of sensor technology integration in additive manufacturing. Jim discusses the direct link between the thermal dynamics that occur during the process and the resultant material properties.
Cameras are commonly used to visualize melt pools. However, considerable uncertainty in size results from an assortment of camera settings, e.g. gain, sensitivity and threshold levels. The Stratonics ThermaViz® sensor eliminates these uncertainties with its true temperature, thermal imaging technology. It provides accurate and high resolution measurement of melt pool temperature, size, cooling rate, and detection of anomaly formation events. An accurate melt pool size measurement is a result of tracing the precise isotherm of solidification, e.g. separating the liquid and solid material.
Article: “For Stratonics and Metal 3D Printing the Heat is on “http://www.engineering.com/3DPrinting/3DPrintingArticles/ArticleID/13133/For-Stratonics-and-Metal-3D-Printing-the-Heat-Is-on.aspx?ENGCOM=
Stratonics, a leader in thermal sensing and control systems for additive manufacturing, will collaborate with Oak Ridge National Laboratory (ORNL) to further the development of the detection of flaws and process parameter optimization, supporting component certification.
Continue reading →
Additive manufacturing (AM) has the ability to fabricate complex geometries and components with improved efficiency and performance, not possible with conventional methods. A current challenge still remains in certifying processes and qualifying components in the effort to transition from prototyping to widespread adoption of AM for production. Process reliability and the repeatability of material properties require understanding, monitoring, and controlling thermal conditions throughout the part and melt pool geometry. Continue reading →